PENOSIL
Backer Rod PE 450

VALUES

• Flexible and compressible
• Closed-cell structure, non-absorbent
• Fast and easy installation
• Prevents moisture from penetrating building’s structure
• Excellent thermal and sound insulation values
• Compatible with polyurethane, hybrid, silicone and other common sealants
• Creates an even joint depth and supports the sealant
• Safe to use
• For interior and exterior use

USAGE INSTRUCTIONS

Choose the backer rod size according to the width and depth of the joint. The backer rod must be approx. 25% larger in diameter than the joint width.

Install backer rod using a blunt tool or a plain roller.

Lightly compress the backer rod into the joint. Set the rod to the depth and ensure it forms a tight seal against the joint edge.

Avoid overlapping the backer rod edges; press the ends tightly together.

Tips

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles and oil stains.
• Ensure that the backer rod is not stretched, punctured or teared during the installation.
• If the joint edges need to be primed, ensure priming is done before the backer rod is installed.

Więcej porad ekspertów w FAQ

Ograniczenia

• The backer rod foam may accumulate electrostatic charges, which might produce electric shocks.
• Temperatures above +250°C may cause the  product to decompose.