Twoja lokalizacja i język
Global
Brazil
Czech Republic
Estonia
Finland
France
Germany
Kazakstan
Latvia
Lithuania
Poland
Portugal
Romania
Spain
Ukraine
United Kingdom
United States
Uzbekistan
Total price: 0 €
Wybierz ilość
Total price:
1 pc (30×30 cm) in a plastic bag
Use a putty trowel to apply the reinforcement patch.
Remove the drain cover. Above the floor trap, cut a round aperture approximately 4 centimetres smaller than the inner diameter. Press the tensioning ring into the aperture and cut off the excess portion of the insert. Follow the instructions from the manufacturer of the floor trap.
Apply a generous layer of waterproofing mastic such as PENOSIL AquaBrake Fiber 640. Then, around the floor trap, add the floor trap reinforcement patch on top of a layer of freshly applied mastic. Make sure the reinforcement patch is pressed tightly to the fresh mastic. Make sure there are no air bubbles between the mastic and reinforcement patch.
Apply a second layer of mastic on top of the reinforcement patch. Make sure the reinforcement patch is well immersed in the mastic.
Otrzymuj cenne informacje od ekspertów PENOSIL, które ułatwią Ci codzienną pracę. W naszym newsletterze znajdziesz:
Przeczytałem/am i akceptuję politykę prywatności.. Zapisz się do newslettera.
Dołącz do społeczności PENOSIL