Your location and language
Global
Brazil
Czech Republic
Estonia
Finland
France
Germany
Kazakstan
Latvia
Lithuania
Poland
Portugal
Romania
Spain
Ukraine
United Kingdom
United States
Uzbekistan
Total price: 0 €
In the construction of modular units, the rigidity, fire resistance and air-tightness of the modules are important. A selection of suitable sealants and adhesives for ceiling panel assembly can be found below.
1
Gluing OSB-, plywood- and chipboards to the wooden frame
2
Gluing the temporary protective membrane
3
Gluing vapor barrier film to the frame
4
Gluing construction boards to framework
5
Improving a structure's fire resistance
To improve the module’s rigidity, in addition to fastening with screws it is also recommended to glue the OSB boards to the wooden frame. This not only makes the structure more rigid but also helps to prevent the appearance of cracks and improves the structure’s sound- and thermal insulation.
SpeedFix Construction 878 Foam adhesive with EasyGun applicator for narrow joints
It is important to protect the modules from various weather conditions during storage, transportation, and on-site installation. In the Penosil range, there are various adhesives that are suitable for gluing the weather protection membrane to the temporary roof. Adhesion should be tested with different types of membranes before product selection.
Products available upon request. Visit our Global page!
There are not many products that are suitable for gluing PE foil. This acrylic adhesive provides sufficient adhesion for PE foil gluing. However, it must be noted that the adhesives between the two foil layers will cure very slowly.
To improve the module’s rigidity, in addition to fastening with screws it is recommended to also glue the construction boards to the module’s framework. This not only makes the structure more rigid but also helps to prevent the appearance of cracks and improves the structure’s sound- and thermal insulation.
Wooden structures need to be as fireproof as possible. The fire-resistant construction boards protect the wooden structure from the inside. To increase the structure’s fire resistance, the corner joint under the two construction boards should be filled with fire-proof sealant.
