FireStop Acrylic 618

VALUES

• Withstands fire up to 4 hours
• Halogen, solvent and asbestos free
• Non-sagging
• Easy tooling
• Practically odourless
• Can be painted
• Excellent adhesion on many materials
• Suitable for interior use

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.
Place the cartridge to a sealant gun.

Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test. If necessary, surfaces can be primed in order to improve the adhesion.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or water. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

More expert tips in FAQ

LIMITATIONS

• Cannot be applied on bitumen or on building materials which might bleed oils or plasticisers (e.g. natural rubber, chloroprene, EPDM).
• Do not use at temperatures below +5°C.
• Do not use in damp or wet conditions or if rain is imminent.
• Not suitable for surfaces in constant contact with water.
• Painting over before the product is fully cured may cause the paint to crack.
• Not suitable for moveable joints (movement more than 7.5%).

SAFETY INFORMATION (CLP AND REACH)

H362 – May cause harm to breast-fed children.
H411 – Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P263 Avoid contact during pregnancy and while nursing.
P264 Wash thoroughly after handling.
P273 Avoid release to the environment.
P501 Dispose of contents/ container in accordance with local/ regional/ national/ international regulation.
EUH208 Contains Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Substances that contribute to the classification: Alkanes, C14-17, chloro.