Foam Remover 995

VALUES

• Softens cured PU foam
• Efficient cleaning
• Easy to use
• Suitabel for cleaning the exterior of a foam gun and various surfaces
• Dissolves different surface treatments
• Interior and exterior use

USAGE INSTRUCTIONS

Shake the can vigorously, remove the cap and attach the spray nozzle to the valve. 

Spray the product on the cured foam to be removed. Avoid spraying on the adjacent surfaces as the product dissolves various surface treatments (varnishes, paints, etc.).

Allow the foam to soften for 5 to 10 minutes and then remove the foam mechanically.
Repeat the process if needed.

Finally, clean the surface with a moist tissue or use PENOSIL Multipurpose Wipes 943. 

TIPS

• Air and can temperature during use: +5°C to +30°C.
• To clean up the product residues, cover the excess product with inert absorbent (e.g. sand). Collect it and place it in a suitable container or let it vaporise.

More expert tips in FAQ

LIMITATIONS

• Test the product's suitability beforehand, danger of damaging some surfaces!
• Not suitable for cleaning the inside of a foam gun.
   

SAFETY INFORMATION (CLP AND REACH)

DANGER

H222 – Extremely flammable aerosol.
H229 – Pressurised container: May burst if heated.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ respiratory protection/ eye protection/ protective footwear.
P410+P412 Protect from sunlight.
Do not expose to temperatures exceeding 50°C/ 122°F.
P501 Dispose of contents/ container in accordance with local/ regional/ national/ international regulation.