PENOSIL
Foam Cleaner 929

VALUES

• Instant results
• 2-in-1: use with a foam gun or spray nozzle
• Efficient cleaning
• Easy and fast to use
• Sprayable
• Interior and exterior use

USAGE INSTRUCTIONS

Shake the can vigorously.

Cleaning foam gun:
Hold the cleaner can in an upright position with the valve up. Screw the cleaner can onto the gun valve.
Spray the product until there is no more foam residue coming out of the gun.
Wait approx. 2 min and spray again to finish cleaning the gun.

Cleaning clothes, surfaces and exterior of the foam gun:
Use the spray nozzle to clean surfaces from uncured foam.
Attache the spray nozzle to the valve.
Spray the cleaner on the surface and wipe the foam residue off with a soft tissue or with PENOSIL Multipurpose Wipes 943.

TIPS

• Air temperature during use: -10°C to +30°C.

More expert tips in FAQ

LIMITATIONS

• Cleaner is inflammable and combustible.
• Only use in well-ventilated areas, vapours may cause dizziness or vertigo.
• Use protective gear, avoid contact with skin and eyes.
• Not suitable for removing cured PU foam.

SAFETY INFORMATION (CLP AND REACH)

DANGER

H222 – Extremely flammable aerosol.
H229 – Pressurised container: May burst if heated.
H319 – Causes serious eye irritation.
H336 – May cause drowsiness or dizziness.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/ protective footwear.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight.
Do not expose to temperatures exceeding 50 °C/ 122°F.
P501 Dispose of contents/ container in accordance with local/ regional/ national/ international regulation.
EUH066 Repeated exposure may cause skin dryness or cracking.
Substances that contribute to the classification: acetone