ECO Elastic Acrylic 622

VALUES

• Interior and exterior use
• Remains elastic, good movement capability (±12,5%)
• Bright white
• Easy to clean, extra-smooth surface
• Low VOC, safe to use
• Practically odourless
• Can be painted
• Biobased or materials produced with lower ecological footprint: 81% of the components
• Recycled plastic in packaging: >70%

USAGE INSTRUCTIONS

Cut the tip of the cartridge.
Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.

Place the cartridge onto a sealant gun.
Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles and old sealant residues. If needed, cover the adjacent surfaces with masking tape.
• During curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or water. Cured product can be removed mechanically and then with a moist cloth.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Application temperature between +5°C and +40°C.

More expert tips in FAQ

LIMITATIONS

• Can not be applied on bitumen or on building materials which contain tar, might bleed oils or plasticizers.
• Not suitable for joints with movement capability of more than 12,5%.
• Do not use at temperatures below +5°C.
• Not suitable for surfaces in constant contact with water.
• Painting over before the product is fully cured may cause the paint to crack.

SAFETY INFORMATION (CLP AND REACH)

EUH208 Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2Hisothiazol-3-one (3:1). May produce an allergic reaction.