PENOSIL
SpeedFix Seal&Bond PU 860

VALUES

• Fast curing
• Weather and ageing resistant
• For joints up to 40 mm in width
• Good vibration and impact absorption
• Does not sag or create bubbles
• Extremely long service life

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening. Place the cartridge onto a sealant gun.

Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surfaces.

Immediately press the surfaces together and apply pressure until product is fully cured.

TIPS

• Surfaces must be clean, dry and free from any dust and loose particles.
• If needed, cover the adjacent surfaces with masking tape. For wide joints, use a backer rod to ensure joints correct thickness and shape. Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or solvent. Cured product can be removed mechanically.
• Application temperature between +5°C and +35°C.

More expert tips in FAQ

LIMITATIONS

• Do not use at temperatures below +5°C.