PENOSIL
Universal Silicone 315 Multipurpose acetoxy silicone

VALUES

• UV, moisture and ageing resistant
• Permanently elastic
• Mould resistant
• For interior and exterior use
• Excellent mechanical properties
• Fast curing

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed. Place the cartridge onto a sealant gun. Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint. Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• If needed, cover the adjacent surfaces with masking tape. For wide joints, use a backer rod to ensure joints of correct thickness and shape. Ensure sufficient ventilation at the working area.
• During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with Penosil Multipurpose Wipes 943 or solvent. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Cannot be applied on bitumen or on building materials which might bleed oils, plasticisers, or solvents (e.g. natural rubber, chloroprene, EPDM, etc).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Do not use at temperatures below +5°C.
• Not recommended for sealing natural stone surfaces, e.g. marble and granite.
• Corrosive to uncovered metals.
• Not suitable for porous surfaces.