SpeedFix Duragrip 617

VALUES

• Solvent-free
• Strong initial tack
• Very good adhesion on many materials
• UV- and moisture-proof
• Forms a strong and rigid bond
• Practically odourless
• Water based formula
• Can be painted
• For interior use

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening.
Place the cartridge onto a sealant gun.

Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surfaces.
Immediately press the surfaces together and apply pressure until the product is fully cured.

TIPS

• Surfaces must be clean, dry and free from any dust, loose particles and oil residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, protect the adhesive against moisture and provide support until product is fully cured. Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or water. Cured product can be removed mechanically.
• Application temperature between +10°C and +35°C.

More expert tips in FAQ

LIMITATIONS

• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Elements will have a rigid connection, not suitable for moving connections.
• Do not use at temperatures below +10°C.

SAFETY INFORMATION (CLP AND REACH)

EUH208: Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.