Home
Products
Application areas
Adhering
ParquetFix Easy 748

Parquet Adhesive Penosil ParquetFix Easy 748 product image

ParquetFix Easy 748

Name: ParquetFix Easy 748
SKU: 8425589143528
Availability: OutOfStock

Hybrid parquet adhesive

Ready-to-use parquet adhesive. Penosil ParquetFix Easy 748 is suitable for installing all types of parquet and wooden flooring. Order now at Penosil e-shop!

PENOSIL ParquetFix Easy 748 is a ready-to-use single-component hybrid parquet adhesive for installing all types of parquets and wooden flooring. Reduces noise and compensates wood’s expansion and contraction. Safe to use as it is silicone, isocyanate, solvent and odour free.

Elastic

Sound insulation

Long processing time

Colour

ParquetFix Easy 748 quantity

89.94£ / pc

89.94£ / box

74.95£ / Box

Vat incl. 89.94£ / Box

Available upon request.

Add to my listRemove from my list

Add to my list

Where to buy

EAN: 8425589143528

Product values

VALUES

Easy to use
Noise-reducing properties
Suitable for underfloor heating
Floor can already be used after 24 hours
No need to prime concrete surfaces
Durable and withstands load
Compensates wood’s expansion and contraction
Silicone, isocyanate and solvent free

Application & Package

APPLICATION AREAS

Installing massive-, mosaic-, slatted-, two- / three-layered parquets (DIN/EN 13489).
Installing industrial parquets and wooden boarding.
Suitable for underfloor heating.

ADHERES TO

Concrete
Self-levelling compounds
Plasterboard
Magnesium oxide plate
Fibre board
Substrates made out of putty

PACKAGE

16 kg bucket

Documents

ParquetFix Easy 748 Technical Data Sheet

ParquetFix Easy 748 Safety Data Sheet

Usage instructions

USAGE INSTRUCTIONS

Cut the corner of a foil bag and pour some product onto the subsurface. Spread the adhesive with a notch trowel onto an area that can be covered within the application time.

Press the parquet elements onto the adhesive, shift them to the correct position and bring together by using an installation hammer.

To install the flooring, follow the parquet manufacturer's instructions.

Do not allow the product to get between the parquet elements. Any adhesive on the parquet elements must be removed immediately.

Weights must be used to fix the flooring: approximately 15 – 20 kg/m².

Final curing time is 24 hours.

Limitation & tips

TIPS

Surfaces must be clean, dry, stable and free from any dust, loose particles and oil residues.
Bring the adhesive to room temperature before application.
For 1kg/m² use the trowel B6.
Depending on the notch trowel, subfloor and flooring, the consumption is approximately 1-1.7kg/m².
Minimum 1 kg of adhesive must be used for 1 m². If necessary use bigger trowel for more adhesive.
It is recommended to pretest the working conditions.
Leftover adhesive can be preserved by closing the corner of the foil bag with clamp and then closing the container lid.
Application temperature between +10°C and +30°C, optimum usage temperature between +18°C and +25°C. Air humidity should not exceed 65% during application.

More expert tips in FAQ

LIMITATIONS

The adhesion and compatibility should be tested beforehand for wooden flooring that has been previously treated with chemicals or contains large amount of oil.
Do not use on moist, uninsulated surfaces.
Not suitable for substrates containing plasticisers.
Not suitable for surfaces containing asphalt.
Adhesive does not substitute insulation or protect wood from moisture.
Air humidity should not exceed 65% during application.