SpeedFix Mirror 364

VALUES

• Fast, strong and permanently elastic bond
• High movement capability 
• Does not affect mirror's reflective layer
• Adhesion with many materials
• Non-corrosive to metals
• Does not need primers
• Non-sagging, easy to use
• Solvent-free and non-shrinking
• Suitable for interior and exterior use

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening. Place the cartridge onto a sealant gun.

Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surfaces.

Immediately press the surfaces together and apply pressure until product is fully cured.

TIPS

• Surfaces must be clean, dry and free from any dust, loose particles and oil residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• Double-sided tape must be used to provide extra support when fixing the mirror.
• During the curing process, provide support until product is fully cured. Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

More expert tips in FAQ

LIMITATIONS

• Do not use at temperatures below +5°C.
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).

SAFETY INFORMATION (CLP AND REACH)

WARNING

H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P261: Avoid breathing vapours.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/respiratory protection/eye protection/protective footwear.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of the contents and/or its container using the separate collection system in your municipality.
Contains N-(3-(trimethoxysilyl)propyl) ethylenediamine.
Butan-2-one O,O´,O´´-(vinylsilylidyne) trioxime.