PENOSIL
SpeedFix Cyano 625

VALUES

• Precise dosing
• Extremely high initial grab
• Fast curing
• Suitable for vertical surfaces
• Excellent adhesion on many materials
• Suitable for porous and uneven surfaces
• Withstands load
• Suitable for interior and exterior use

USAGE INSTRUCTIONS

One of the materials to be bonded must have a smooth surface and a good connection surface.

Apply a layer of activator on one of the surfaces. Wait until surfaces are completely dry (approx. 10 seconds).

Then apply a few drops of glue on one of the surfaces and press them firmly together for a few seconds.

TIPS

• Surfaces to be bonded must be clean, dry and free from any dust and loose particles.
• Immediately after application, remove any excess product with a dry cloth. Cured product can be removed mechanically.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.

More expert tips in FAQ

LIMITATIONS

• Avoid contact with skin and eyes – can cause serious eye injury.
• Activator is flammable and pressurised. Do not throw into fire, drill or crush the container.

SAFETY INFORMATION (CLP AND REACH)

DANGER

H222 – Extremely flammable aerosol.
H229 – Pressurised container: May burst if heated.
H315 – Causes skin irritation.
H336 – May cause drowsiness or dizziness.
H350 – May cause cancer.
H411 – Toxic to aquatic life with long lasting effects.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P280: Wear protective gloves/ face protection/ protective clothing/ respiratory protection/ protective footwear.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308+P313: IF exposed or concerned: Get medical advice/ attention.
P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122°F.
P501: Dispose of the contents and/ or its container in line with regulations on dangerous waste or packaging and waste packaging respectively.
Substances that contribute to the classification: Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane; N,N-dimethyl-p-toluidine
Restricted to professional users