PENOSIL
SpeedFix Seal&Bond 751

Values

• Crystal clear
• Fast and strong
• Non-shrinking
• Can be used on humid surfaces
• Silicone and solvent free
• Non-corrosive
• Interior and exterior use
• Excellent adhesion on many materials

Usage Instructions

Cut the tip of the cartridge. Screw on the nozzle and cut an opening.
Place the cartridge onto a sealant gun.

Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surface.
Immediately press the surfaces together and apply pressure until product is fully cured.

TIPS

• Surfaces must be clean, dry and free from any dust, loose particles and oil residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, protect the adhesive against moisture and provide support until product is fully cured. Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or solvent. Cured product can be removed mechanically.

More expert tips in FAQ

LIMITATIONS

• Cannot be applied on bitumen or on building materials which might bleed oils, plasticisers, or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM or flexible PVC).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Not suitable for glazing activities.
• Preliminary compatibility test is recommended for natural stone surfaces.

SAFETY INFORMATION (CLP AND REACH)

EUH208: Contains Dibutyltin Dilaurate, Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-
pentamethyl-4-piperidyl sebacate, Trimethoxyvinylsilane. May produce an allergic reaction.