HomeProductsProduct groupsPU foamsEasySpray foamsEasySpray Foam 111

PENOSIL
EasySpray Foam 111

Name: EasySpray Foam 111
SKU: 30572

- Sprayable gun foam

0 € / pc

PENOSIL Low Monomer Sprayfoam 111 is a sprayable gun foam for insulating uneven, round and hard-to-reach surfaces such as pipes, containers, vessels, etc.

Product description

PENOSIL EasySpray Foam 111 is a ready-to-use sprayable PU gun foam for sealing and insulating all types of inconvenient places and surfaces, where using traditional insulation materials is difficult. Its special spray applicator and very low diisocyanate content make it fast, convenient and safe to use.

Colour

Elastic

Prevents condensation

Prevents thermal bridges

Select quantity

EasySpray Foam 111 quantity

Add to my listRemove from my list

Add to my list

Total price:

Where to buy

Product values

Application & Package

Documents

Usage instructions

Limitation & tips

Product values

VALUES

Very low (<0.1%) diisocyanate content
Excellent air tightness, thermal- and sound-insulation properties
Enhanced UV resistance
Quick and easy application
Excellent adhesion to all common building materials
Good movement capability
Thickness of the insulation layer is freely selectable
Spray applicator compatible with most foam guns

Application & Package

APPLICATION AREAS

Sealing and insulating all types of inconvenient places, uneven and round surfaces, where using traditional insulation materials is difficult.
Thermal- and sound-insulating lintels, doors, ceilings, pipes, attics, balconies, garages, cellars, containers, vehicles, vessels and other construction parts with the risk of thermal bridges.
Insulating hard-to-reach surfaces and repairing the existing insulation layer.
Reducing the impact of thermal bridges.
Preventing condensation on cold surfaces.

ADHERES TO

Wood
Concrete
Bricks
Stone
Masonry
Plaster
Plasterboard
Metals
PVC
Polystyrene

PACKAGE

Aerosol can 1000 ml, content 700 ml
12 pcs per box

Documents

EasySpray Foam 111 Declaration of Performance

EasySpray Foam 111 Technical Data Sheet

EasySpray Foam 111 Environmental Product Declaration

Certificates

M1_certificate_eng

Usage instructions

USAGE INSTRUCTIONS

Surfaces must be clean from dust, loose particles and oil stains.
Moisten dry surfaces with water mist to ensure a faster curing time and better end results.

Attach the spray applicator onto the tip of the foam gun. Shake the can vigorously at least 20 times. Hold the foam can in an upright position with the valve up. Hold the foam can adapter in place with your fingers while screwing the gun onto the can. Hold the can upside down when extruding the foam. Foam output can be adjusted with gun trigger and adjustment screw. Rotate the spray applicator as needed.

Apply the foam from approx. 40 cm distance. One foam layer’s thickness is max. 2 cm. Wait at least 60 min before applying the next layer. Number of layers is not limited. When applying foam in layers, moisten slightly between each layer. Excess foam can be cut off after it has fully cured.

Do not aim the gun at people. Avoid screwing the gun onto the can with valve upside down. Do not bend or turn the can during screwing.

Limitation & tips

Tips

Air temperature during use: +10°C to +30°C.
Protect adjacent surfaces with paper, plastic film or other suitable material.
Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C).
Use Penosil Foam Cleaner 929 to clean tools and surfaces of uncured foam.
Use Penosil Cleaning Wipes 941 to clean hands and clothes of uncured foam.
Penosil Foam Remover 995 softens cured foam and helps to remove it easier.

Limitations

Does not adhere to polyethylene (PE) or PTFE (Teflon®) or silicone surfaces.
Do not use at temperatures below +10°C.
Although the cured foam is less sensitive to UV and direct sunlight than other PU foams, it is still recommended to cover it with a suitable opaque material.
Do not cover before foam has fully cured.
Spray applicator is compatible with most foam guns. Always check compatibility before choosing the foam gun.