Your location and language
Global
Brazil
Czech Republic
Estonia
Finland
France
Germany
Kazakstan
Latvia
Lithuania
Poland
Portugal
Romania
Spain
Ukraine
United Kingdom
United States
Uzbekistan
Total price: 0 €
The prefabricated concrete elements help to significantly shorten the construction time on site and ensure a higher product quality as the concrete elements have been produced in a controlled environment.
1
Sealing corners of concrete framework
2
Sealing thermal insulation joints
3
Gluing the concrete framework corners
4
Installing windows with PU foam
5
Air- and vapour-proofing window joints
6
Weather-sealing window perimeters
7
Backing material for sealant
Sealing the concrete element’s framework is essential to prevent the water from infiltrating the element and to ensure that it will have the correct corner finishing. Penosil offers a variety of weatherproof sealants for this purpose.
Neutral Sanitary Silicone 350/350c Multipurpose neutral silicone
Neutral Silicone 325/325c Multipurpose neutral silicone
Building Silicone 322/322C Multipurpose neutral silicone
If the insulation boards cannot be pressed completely against each other, gaps remain between the boards that cause air leakages. In order to prevent thermal bridges and air leakages, it is necessary to seal the joints with a construction foam that has good thermal insulation values. To fill the narrow and tight joints between insulation boards, we recommend using a construction foam with our patented EasyGun applicator.
Elastic Gunfoam 198 Elastic installation gun foam
EasyGun Foam 108 All-season insulation gun foam
Fire Rated Gunfoam B1 187 Fire-rated gun foam
To ensure perfectly shaped concrete element corners, it is recommended to glue them to the framework with sealant. Well-shaped corners are not only aesthetically pleasing but also prevent concrete wash from seeping through the structure.
A growing trend is that windows are already installed on the concrete element at the factory. The quality of installation work in a controlled factory environment is better, and it reduces the construction time on site. To minimise heat losses in window connections, the joints between the window frame and wall must be sealed with a construction foam. For window installation, it is important to choose a PU foam that has an elastic structure, and is therefore able to move with the building’s deformations, and has excellent thermal- and sound-insulation values.
Installation Gunfoam 65 191 High yield winter gun foam
A growing trend is that windows are already installed on the concrete element at the factory. The quality of installation work in a controlled factory environment is better, and it reduces the construction time on site. To avoid heat losses, condensation and mould growth, the window and wall connecting joints should be sealed from inside with air- and vapour-proof tapes.
Window Tape Full Glue +1 Internal 400 Double-sided internal window tape
One of the last steps in window installation is the final sealing and filling of window joints. For this work, it is highly recommended to use sealants with weather- and UV-proof properties and high elasticity.
Facade Joint Hybrid 25LM Hybrid facade joint sealant
To ensure a sealant’s correct thickness and shape, it is recommended to use a backer rod in the joint to be sealed. Using a backer rod in a sealant joint reduces the quantity of sealant used and helps to avoid the sealant’s three-sided adhesion.
Backer Rod PE 450 Closed cell foam backer rod
Zostaniesz przekierowany na stronę należącą do Plonmar Sp.z.o.o., wyłącznego przedstawiciela marki PENOSIL w Polsce.
Wolf Group OÜ nie ponosi odpowiedzialności za informacje zamieszczone na tej stronie.
Jeśli chcesz pozostać na oficjalnej wersji strony internetowej Wolf Group OÜ, producenta produktów marki PENOSIL, wybierz opcję Global (in English) w menu.
You are being redirected to a website of GC "Plonmar Sp.z.o.o." - the exclusive representative of PENOSIL trademark in the Poland.
Wolf Group OÜ disclaims any liability for the information posted on this website.
If you want to stay on the Russian language version of the website of Wolf Group OÜ - the manufacturer of the products under PENOSIL trademark, please select Global (in English) in the menu.