PENOSIL
Aquarium Silicone 380 Acetoxy silicone for glass structures

VALUES

• Permanently elastic
• Safe for aquatic life
• Works well with fresh and salt water
• Fast curing
• Non-sagging
• UV proof
• Easy to use

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening. Place the cartridge onto a sealant gun.

Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surfaces. 

Immediately press the surfaces together and apply pressure until product is fully cured.
 

TIPS

• Surfaces must be clean, dry and free from any dust, loose particles and oil residues.
• During the curing process, protect the adhesive against moisture and provide support until product is fully cured. Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or solvent. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Cannot be applied on bitumen or on building materials which might bleed oils, plasticisers, or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM or flexible PVC). 
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).