PENOSIL
ECO Elastic Acrylic 622 Sustainable siliconized acrylic

VALUES

• Interior and exterior use
• Good movement capability (±12,5%)
• Bright white, extra smooth surface
• Easy to clean
• Remains elastic
• Low VOC, safe to use
• Practically odourless
• Can be painted

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed. Place the cartridge to a sealant gun. Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles and old sealant residues. If needed, cover the adjacent surfaces with masking tape.
• During curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or water. Cured product can be removed mechanically and then with a moist cloth.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Can not be applied on bitumen or on building materials which contain tar, might bleed oils or plasticizers.
• Not suitable for joints with movement capability of more than 12,5%.
• Do not use at temperatures below +5°C.
• Not suitable for surfaces in constant contact with water.
• Painting over before the product is fully cured may cause the paint to crack.