Foam Remover 995

VALUES

• Softens cured PU foam
• Efficient cleaning
• Easy to use
• Suitabel for cleaning the exterior of a foam gun and various surfaces
• Dissolves different surface treatments
• Interior and exterior use

USAGE INSTRUCTIONS

Shake the can vigorously, remove the cap and attach the spray nozzle to the valve. 

Spray the product on the cured foam to be removed. Avoid spraying on the adjacent surfaces as the product dissolves various surface treatments (varnishes, paints, etc.).

Allow the foam to soften for 5 to 10 minutes and then remove the foam mechanically. 
Repeat the process if needed.

Finally, clean the surface with a moist tissue or use PENOSIL Cleaning Wipes 941. 

Tips

• Air and can temperature during use: +5°C to +30°C.
• To clean up the product residues, cover the excess product with inert absorbent (e.g. sand). Collect it and place it in a suitable container or let it vaporise.

More expert tips in FAQ

Limitations

• Test the product's suitability beforehand, danger of damaging some surfaces!
• Not suitable for cleaning the inside of a foam gun.