Your location and language
Global
Brazil
Czech Republic
Estonia
Finland
France
Germany
Kazakstan
Latvia
Lithuania
Poland
Portugal
Romania
Spain
Ukraine
United Kingdom
United States
Uzbekistan
Total price: 0 €
Select quantity
Total price:
1000 ml aerosol can, content 750 ml, 12 pcs per box.
Working with the EasyGun applicator Keep the can in an upright position and remove the cap on the adapter. Install the EasyGun applicator onto the can valve by pushing it lightly until it attaches. Shake the can vigorously at least 20 times.To use it, turn the bottom of the can upwards and push the trigger of the EasyGun applicator with your fingers. Adjust the foam amount with the trigger of the applicator.
Use with a foam gun Keep the can in an upright position and remove the cap on the adapter. Screw the can onto the gun, holding the handle of the gun with one hand and screwing the can with the other. While screwing, make sure that the gun is not pointed at anyone. Do not screw the can onto the gun with the valve facing downwards and also do not screw the gun above the can. Shake the can vigorously at least 20 times. To use it, turn the bottom of the can upwards and press the trigger. The amount of foam is controlled by the gun trigger.
Fixing of insulation and interior finishing boards Apply the adhesive foam with even strips on both sides of the insulation or finishing board (3–4 cm from the edge) and one strip in the middle of the board parallel to the long side (gaps up to 25 cm). After installing the adhesive foam onto the insulation board, wait 2-3 minutes and then push the board onto the wall. The evenness of fixed boards can be adjusted up to 5 min.
Mounting of window sills Before fixing the sill make sure that the base is level. Mount the window sill to support blocks. The foam can only be used as a glue. Apply the adhesive to the substrate at a distance of 3–4 cm from edge. Use weights to fix sill until the adhesive foam is cured.
Gluing of building blocks The adhesive foam can be used for laying interior walls with non-load-bearing building blocks. The first block row must be levelled with a mortar. The substrate must be moistened because the adhesive foam cures through atmospheric humidity. At temperatures below +5°C it is recommended to treat the block surface with PENOSIL Premium Foam Activator.
The adhesive foam forms a thin layer of adhesive. After the adhesive is formed, squeeze the blocks together immediately. The adhesive must be applied to both the vertical and horizontal sides of the stone block.
Consult the reseller or an architect for compatibility with different stone-based materials and other technical issues regarding adhesive strength.
Zostaniesz przekierowany na stronę należącą do Plonmar Sp.z.o.o., wyłącznego przedstawiciela marki PENOSIL w Polsce.
Wolf Group OÜ nie ponosi odpowiedzialności za informacje zamieszczone na tej stronie.
Jeśli chcesz pozostać na oficjalnej wersji strony internetowej Wolf Group OÜ, producenta produktów marki PENOSIL, wybierz opcję Global (in English) w menu.
You are being redirected to a website of GC "Plonmar Sp.z.o.o." - the exclusive representative of PENOSIL trademark in the Poland.
Wolf Group OÜ disclaims any liability for the information posted on this website.
If you want to stay on the Russian language version of the website of Wolf Group OÜ - the manufacturer of the products under PENOSIL trademark, please select Global (in English) in the menu.