PENOSIL
Floor&Wall ParquetFix 749 Elastic parquet adhesive

VALUES

• Easy to use
• Noise-reducing properties
• Suitable for underfloor heating
• Floor can already be used after 24 hours
• No need to prime concrete surfaces
• Durable
• Withstands loads
• Compensates wood’s expansion and contraction
• Silicone, isocyanate and solvent free

USAGE INSTRUCTIONS

Cut the corner of a foil bag and pour some product onto the subsurface. Spread the adhesive with a notch trowel onto an area that can be covered within the application time. Press the parquet elements onto the adhesive, shift them to the correct position and bring together by using an installation hammer. To install the flooring, follow the parquet manufacturer’s instructions.

Do not allow the product to get between the parquet elements. Any adhesive on the parquet elements must be removed immediately.

Weights must be used to fix the flooring: approximately 15-20 kg/m².

Final curing time 24 hours.

TIPS

• Surfaces must be clean, dry, stable and free from any dust, loose particles and oil residues.
• Bring the adhesive to room temperature before application.
• For 1 kg/m² use the trowel B6.
• Depending on the notch trowel, subfloor and flooring, the consumption is approximately 1-1.7 kg/m².
• Minimum 1 kg of adhesive must be used for 1 m². If necessary use a bigger trowel for more adhesive.
• It is recommended to pretest the working conditions.
• Leftover adhesive can be preserved by closing the corner of the foil bag with clamp and then closing the container lid.
• Application temperature between +5°C and +30°C, optimum usage temperature between +18°C and +25°C. Air humidity should not exceed 65% during application.

LIMITATIONS

• The adhesion and compatibility should be tested beforehand for wooden flooring that has been previously treated with chemicals or contains a large amount of oil.
• Do not use on moist, uninsulated surfaces.
• Not suitable for substrates containing plasticisers.
• Not suitable for surfaces containing asphalt.
• Adhesive does not substitute insulation or protect wood from moisture.
• Air humidity should not exceed 65% during application.