PENOSIL
No Mould Silicone 303 Elastic sanitary silicone

VALUES

• High movement capability (±25%)
• Mould, UV and ageing resistant
• Waterproof in 20 minutes
• Non-shrinking
• Highest sanitary class: XS1

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed. Place the cartridge to a sealant gun.

Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent excess should be removed with a clean cloth.
• If needed, cover the adjacent surfaces with masking tape. For wide joints, use a backer rod to ensure joints correct thickness and shape. Ensure sufficient ventilation at the working area.
• During curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with Penosil Cleaning Wipes 941 or solvent. Cured product can be removed mechanically and then with a moist cloth.
• Application temperature between +5°C to +40°C.

LIMITATIONS

• Can not be applied on bitumen or on building materials which might bleed oils, plasticizers or solvents (e.g. natural rubber, chloroprene or EPDM).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Do not use at temperatures below +5 °C.
• Not recommended for sealing metal or natural stone surfaces e.g. marble and granite.
• Can not be used as mirror adhesive.
• Can not be painted.