Landscaping Adhesive 865

VALUES

• All-season use (-10°C to +30°C)
• Ideal for securing landscaping stones
• Excellent adhesive properties 
• Can be used in contact with water 
• Safe to use, cured foam is harmless to 
  animals and plants
• 2 in 1, can be used with a foam gun or EasyGun applicator
• Low curing pressure and post expansion
• Suitable for both interior and exterior use

USAGE INSTRUCTIONS

Surfaces must be clean from dust, loose particles, ice and oil stains.
Moisten dry surfaces with water mist (only at temperatures above zero) to ensure a faster curing time and better end results.

Application with foam gun:
Shake the can vigorously at least 20 times. Hold the foam can in an upright position with the valve up.
Hold the foam can adapter in place with your fingers while screwing the can onto the gun. Hold the can upside down when extruding the foam. Foam adhesive output can be adjusted with a gun trigger and adjustment screw.
Do not aim the gun at people. Avoid screwing the can onto the gun with the valve upside down. Do not bend or turn the can during screwing.

EasyGun applicator:
Shake the can vigorously at least 20 times. Remove the cap. Hold the foam can in an upright position with the valve up.
Place the applicator onto the valve, press slightly until the applicator is fixed. Hold the can upside down when extruding the foam.
Foam adhesive output can be adjusted with the applicator trigger.

Apply a thin layer of foam adhesive, wait few minutes and then press the surfaces together.
 

Tips

• Air temperature during use: -10°C to +30°C.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test. 
• Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C). 
• Use Penosil Foam Cleaner 929 to clean tools and surfaces from uncured foam. 
• Use Penosil Cleaning Wipes 941 to clean hands and clothes from uncured foam. 
• Foam adhesive can be used only when even distribution of load from block to block is ensured. 

More expert tips in FAQ

Limitations

• Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.
• Do not use at temperatures below -10°C.
• Not suitable for building load carrying structures.