PENOSIL
Landscaping Adhesive 865 Foam adhesive for landscaping works

VALUES

• Excellent adhesive properties
• All-season use (-5°C to +30°C)
• Low curing pressure
• Ideal for securing landscaping stones
• Perfect for outdoor use
• Low post expansion

USAGE INSTRUCTIONS

Foam adhesive should be applied to horizontal surfaces.

Surfaces must be clean from dust, loose particles and oil stains. Moisten dry surfaces with water mist (only at temperatures above zero) to ensure a faster curing time and better end results.

Shake the can vigorously at least 20 times. Hold the foam can in an upright position with the valve up. Screw the can onto the gun. Hold the can upside down when extruding the foam. Foam output can be adjusted with a gun trigger and adjustment screw.

Do not aim the gun at people. Avoid screwing the can onto the gun with the valve upside down. Do not screw the gun onto the can. Do not bend or turn the can during screwing.

Apply a thin layer of foam adhesive, wait few minutes and press the surfaces together.

TIPS

• Air temperature during use: -5°C to +30°C.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C).
• Use Penosil Foam Cleaner 929 to clean tools and surfaces from uncured foam.
• Use Penosil Cleaning Wipes 941 to clean hands and clothes from uncured foam.
• Penosil Foam Remover 995 softens cured foam and helps to remove it easier.
• Foam adhesive can be used only when even distribution of load from block to block is ensured.

LIMITATIONS

• Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.
• Do not use at temperatures below -5°C.
• Not suitable for building load carrying structures.