PENOSIL
Neutral Silicone 317 Neutral silicone for building works

VALUES

• Excellent adhesion on a wide range of materials
• Low elastic modulus
• Perfect for glazing works
• Weatherproof
• UV and ageing resistant
• Non-corrosive

USAGE INSTRUCTIONS

Cut the tip of the cartridge.
Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.

Place the cartridge onto a sealant gun.
Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent excess should be removed with a clean cloth.
• If needed, cover the adjacent surfaces with masking tape. For wide joints, use a backer rod to ensure joints correct thickness and shape. Ensure sufficient ventilation at the working area.
• During curing process, make sure that the sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Cleaning Wipes 941 or solvent. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Can not be applied on bitumen or on building materials which might bleed oils, plasticizers, or solvents (e.g. natural rubber, chloroprene, EPDM, etc).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Do not use at temperatures below +5°C.
• Not recommended for sealing natural stone surfaces e.g. marble and granite.