PENOSIL
Painters Acrylic 606 Paintable acrylic sealant

VALUES

• Non-sagging
• Paintable
• Extra fine texture
• Low VOC
• Free of solvents, isocyanates, silicones
• Practically odourless

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed. Place the cartridge to a sealant gun. Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint. Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles and oil stains.
• Uncured product can be removed with water or Penosil Cleaning Wipes 941. Cured product can be removed mechanically and then with a moist cloth.
• To guarantee products longevity, once cured it is recommended to cover it with paint.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Can not be applied on bitumen or on building materials which contain tar, might bleed oils or plasticizers.
• Do not use at temperatures below +5°C.
• Not suitable for joints with movement capability of more than 7,5%.
• Painting over before the product is fully cured may cause the paint to crack.