PENOSIL
PU-Sealant LM 825

VALUES

• Permanently elastic, high movement capability (±25%)
• UV-, moisture and weatherproof
• Fast and easy to use
• Can be applied on damp surfaces
• Non-sagging, excellent for vertical joints
• Low elastic modulus
• Can be painted with water based paints
• Very good adhesion on many materials
• For interior and exterior use

USAGE INSTRUCTIONS

Place the package into the foil pack gun.
Snip the top off the foil package, just below the metal clip.
Screw on the nozzle with the cap.

Cut an opening to the nozzle at a 45° angle which is slightly larger than the joint to be sealed.
Apply the sealant by keeping even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

Tips

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• If needed, cover the adjacent surfaces with masking tape. For wide joints, use a backer rod to ensure the joints correct thickness and shape. Ensure sufficient ventilation at the working area.
• During the curing process, make sure that the sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Cleaning Wipes 941 or solvent. Cured product can be removed mechanically.
• Application temperature between +5°C and +35°C.
• Final curing time depends on the thickness of the sealant layer and air temperature.

More expert tips in FAQ

Limitations

• Cannot be applied on bitumen or on building materials which might bleed oils, plasticisers, or solvents (e.g. natural rubber, chloroprene, EPDM, etc.).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Do not use at temperatures below +5°C.
• Not recommended for sealing natural stone surfaces, e.g. marble and granite.