Penosil
Wood Sealant 698

Values

• Does not crack
• Extra-smooth finish
• Ready to paint after 2 hours
• Flexible and durable seal
• Very low shrinkage
• Odourless
• Easy tooling
• Excellent adhesion with many materials
• Large colour choice
• Can be painted
• Suitable for interior and exterior use

Usage Instructions

Cut the tip of the cartridge.
Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.

Place the cartridge onto a sealant gun.
Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

Tips

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, make sure that the sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test. If necessary, surfaces can be primed in order to improve the adhesion.
• Uncured product can be removed with PENOSIL Cleaning Wipes 941 or water. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

More expert tips in FAQ

Limitations

• Cannot be applied on bitumen or on building materials which contain tar, might bleed oils or plasticisers.
• Do not use at temperatures below +5°C.
• Not suitable for sealing surfaces in constant contact with water.
• Not suitable for high deformations and movable joints.
• During the curing process the product colour might change slightly.
• Can not be used on untreated metals due to risk of oxidation.