SpeedFix Universal 907

VALUES

• All-season use (-10°C to +40°C)
• Super-fast and extra-strong bonding
• Can be painted
• Rigid and long-lasting bond
• Very good adhesion on many materials
• Does not require primers
• Water resistant
• Interior and exterior use

USAGE INSTRUCTIONS

Cartridge: 
Cut the tip of the cartridge. Screw on the nozzle and cut an opening.
Place the cartridge onto a sealant gun. Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surface.
Immediately press the surfaces together and apply pressure until product is fully cured.

Foil package: 
Place the package into the foil pack gun. Snip the top off the foil package, just below the metal clip.
Screw on the nozzle with the cap. Cut an opening into the nozzle.
Apply the adhesive by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the surface.
Immediately press the surfaces together and apply pressure until product is fully cured.

Tips

• Surfaces must be clean, dry and free from any dust, loose particles and oil residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, protect the adhesive against moisture and provide support until product is fully cured.
• Ensure sufficient ventilation at the working area.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Uncured product can be removed with PENOSIL Cleaning Wipes 941 or solvent. Cured product can be removed mechanically.
• Application temperature between -10°C and +40°C.

More expert tips in FAQ

Limitations

• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Not compatible with EPS, XPS.
• Not suitable for underwater use or for surfaces in constant contact with water.
• Elements will have a rigid connection, not suitable for moving connections.