PENOSIL
Prime&Fix 900 Sprayable adhesive and primer

VALUES

• Adhesion promotor for window tapes
• Can be used at low temperatures (up to -5°C)
• Interior and exterior use
• Quick and strong connection
• Excellent adhesion on many porous and non-porous surfaces
• Multipurpose – adhesive and primer in one

USAGE INSTRUCTIONS

Surfaces must be clean, dry and free from any dust, loose particles and oil stains. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.

Shake the can vigorously at least 30 times. From a distance of 5 to 10 cm spray a thin layer of product onto the surface. Wait for 15 to 60 sec, then press the surfaces together.

For contact bonding: Spray the adhesive on both surfaces to be bonded.

To ensure the best adhesion, use a pressure roller.

Depending on the surfaces, final drying time can be up to 20 minutes.

TIPS

• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Remove product residues immediately with solvent.
• If the whole aerosol can will not be used within 24 h, after finishing the work, turn the can upside down and press the applicator a few times to remove any product residue.
• A 500 ml aerosol can covers an approximately 2 m² surface. When priming surfaces for vapour and wind barrier tapes, a 500 ml can covers approximately 100 m of 5 to 10 cm wide strips.
• Application temperature between -5°C and +35°C.

LIMITATIONS

• Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®), polystyrene (incl. EPS, XPS), bitumen, PVC or PVC-coated materials.
• Not suitable for underwater use or for surfaces in constant contact with water.
• Do not store near an open fire or an active source of heat.
• Do not use at temperatures below -5°C.